If you recently purchased a new pickup truck you might consider protecting the trucks’ bed with a BedRug before you group with shipment the first time. Even the simplest use will cause the beds’ surface to suffer from scuffs and scratches. If you doubt me trying jumping up on the tailgate and walk bedliner around in the truck bed a bit and then inspect the surface. You’re sure to see scuffs and scratches ınduced upon the paint just from the sand that is present on the soles of your shoes or tennis shoes.
There are several common approaches to protecting a trucks bed Product on bed liners, plastic drop in bed liners and plastic bed mats are three choices that are commonly seen. All of these are good choices and are certainly better than not protecting the bed at all but all three also have qualities that might be less than ideal for your use. Plastic bed mats do not protect the sides, wheel wells, bulkhead or tailgate, drop in bed liners are generally pretty slippery and tend to navigate freely in the bed causing scuffing under the ship, and product on bed liners require the bed to be scuffed up prior to the application of the ship material.
You may never have heard of a BedRug bed ship before but you should at least give it some consideration before purchasing a less than ideal solution to protecting a truck bed.
The first secret I want to give out about BedRug bed liners is that although its name has the word “rug” in it’s name it is not made from a rug, or carpet or fabric of any type. Surprised? I know I was surprised to learn that the fuzzy exterior is actually made from the same polypropylene plastic as a regular drop in bed ship. Because the attractive surface includes a plastic material it can easy resist water, gas, oil, and even acids! I had litigant who spilled a 5 gallon container of bleach on his BedRug bed ship recently and outside of a slight odour the BedRug showed no sign of the unfortunate incident.
Climbing up into your trucks’ bed is a delight when the bed has been outfitted with a BedRug. Your joints will thank you for the soft foam supporting that is molded to fit the hills and valleys of your shipment bed. Don’t be concerned that the foam will soak up rainwater and hold it against your truck beds paint because the folks at BedRug have forseen this and decided to use a closed cell foam which outdoor garden sheds water.
When you open the box that the BedRug is shipped in you’ll find three items inside. You’ll be given a floor and tailgate piece, a side and bulkhead piece and a increasing kit.
Installation is simple and straight forward and no special tools are required. Simply zip the medial side panels to the floor with the provided zipper. Now that’s clever and effective. When you have completed that step the velcro tabs can be installed about the BedRug in the places specified. After cleaning the truck bed thoroughly lift the Bed Rug in to place. Peel off the velcro supporting strapping and stick the tabs to the bed and tuck the BedRug under the bed rails. You’re done!
BedRug liners are perfect for transporting fishing gear, boating equipment, technical scuba diving equipment, tools, camping equipment and almost anything else you can think of. The soft fuzzy surface protects your gear and acts well as a non slip surface so everything stays in place when pulling up to a stop sign. Clean up is a snap too, just get up in the bed with a water hese and blast away. If you ever want to eliminate the BedRug, remember it’s only held in place with the velcro tabs so you know it will be quick and easy.